CSRCV Standalone Wireless Receiver

Available through Wesco

Add wireless doors, windows, and leak detection to any panel you already install. The CSRCV is the standalone receiver in the TideWatch by CondoSecure line: up to 10 CSWDS wireless sensors, with dry-contact outputs.

Up to 10 sensors per CSRCV (5 per channel), assignable to Zone 1 or Zone 2.
Dry-contact outputs: two zone relays plus a trouble relay tie into a conventional alarm panel, annunciator, or CS-Series keypad.
Trouble output on a low sensor battery or a missed check-in.
Indicator lights for Zone 1 and Zone 2 open.
Works with water and door/window sensors: the CSRCV reports a sensor zone open for door or water sensors.
Easy registration: one button on each sensor.

Sensors are ordered separately. See CSWDS sensors for the part numbers.

CSRCV standalone wireless receiver

For dealers: add wireless to a panel already on site

The CSRCV is a simple retrofit for dealers who need to replace an older wireless receiver, or add wireless sensors to an alarm panel that is already installed. It connects to the panel's zone inputs through dry-contact outputs, so the existing panel stays in place.

Any conventional panel that accepts dry-contact zone inputs, as well as annunciators and CS-Series keypads.
One receiver, mixed sensors: up to 10 CSWDS water sensors, magnetic door/window sensors, and external dry-contact transmitters.
Quick to add a sensor: register it with one button, then place it where it is needed.

With CondoSecure in-suite keypads

Each suite with a CS-Series keypad (with Wireless option) can connect with up to 10 CSWDS devices, easily registered to the in-suite keypad.

Alerts for:

Sensor Water Detection/Zone Open
Low Battery
Failed Daily Check-in/Sensor Offline

How the CSRCV connects

The CSRCV is a wired +12VDC receiver. It provides 2-channel outputs; each channel can be assigned up to 5 wireless devices (10 total per receiver). Relays are Normally Closed. Each channel works as a loop of sensors: any open magnetic sensor (no magnet in range) or any triggered water sensor on a channel will open the associated relay. A Trouble contact output is also provided, opening on any sensor with Low Battery or Failed Daily Check-in. Internal and external LEDs show channel/relay contact and trouble status, in coded flashes to indicate device(s).

Need whole-building coverage reported to the security desk? See the Tower System. Same sensors, different receiver.

Available through Wesco.

Order through your local Wesco branch, or contact CondoSecure. Where to buy

Caution