CSRCV80 Tower Receiver

Available through Wesco

The CSRCV80 is the receiver for the TideWatch by CondoSecure Tower System. Each CSRCV80 supports up to 80 CSWDS wireless sensors.

  • Up to 80 sensors per receiver. Each CSRCV80 typically communicates with sensors across several suites.
  • Placed outside the suites, in a secure electrical closet or a hallway.
  • Scales to the whole building: add as many CSRCV80 receivers as needed to connect every suite in a building or condo tower.
  • Connects keypad-style to a CS4858v1. A CS4858v1 RS485 channel splitter is needed only in buildings with more than one or two risers of CSRCV80 receivers.
  • Reports to the desk: water alarms, low batteries, missed check-ins, and receiver power loss report to the desk on the CondoSecure TowerWatch display. The CSRCV80 also flags low battery and missed check-ins on its trouble output and LED.
  • No dry-contact outputs. To add wireless sensors to an existing alarm panel, use the CSRCV standalone receiver.

Same sensors. Different receiver. Do not substitute the 10-sensor CSRCV for the CSRCV80.

Part of the Tower System. Works with CSWDS sensors.

Available through Wesco.

Order through your local Wesco branch, or contact CondoSecure. Where to buy

Contact CondoSecure Where to buy

CSRCV80 Tower Receiver
CSRCV80 Tower Receiver, a small white wall-mounted enclosure with four status lights